Although architrave and Skirting Boards are completely different design elements, they do have a lot in common. They both have decorative purposes, can be combined to create a similar historical style, and neatly conceal joints and spaces between a wall and the window or door frame or the floor. Even though the methods for installing skirting boards and architraves vary widely, there are a few typical errors that can affect how well this installation goes.
Failure to Climatize The Materials
Natural wood is used to make high-quality architrave and skirting boards. Before being bought, these are frequently kept in showrooms or warehouses, where they might acquire moisture from chilly flooring or wet air. This implies that when they dry out, warm up, and become accustomed to your house, they may slightly reduce in size. Therefore, it is not advisable to install the architrave or skirting board as away after unpacking it, since this may cause ugly cracks or gaps. To make sure they are well acclimated, you should ideally layer each item out differently for a few days before to installation.
Trimming off Bad Angles
You must slice at a 45° angle to make the joint for your architrave or baseboard. First and foremost, you should make sure you use a high-quality saw to ensure accuracy and cleanliness. You should also make sure that you trim in the correct direction, depending on whether or not this is an external or internal connection, since this will prevent the two pieces from fitting together.
Completely Fastening Screws And Nails
If you plan to install the skirting board or the architrave with nails or screws, wait until you are satisfied with the placement before securing them completely into the wood. Allow them to be somewhat visible so that the architrave or mop PVC Skirting Boards can be positioned correctly for the optimum fit. After that, you can screw or pound in the nails completely.
Selecting A Size That Differs From The One You are Replacing
When selecting skirting boards and architraves to replace existing ones, be sure to order the same size in terms of thickness and height. If you don't, there will be spaces that connect the plaster and the architrave or skirting board. Depending on how thick the skirting board is, this may also show a space between any removed carpet or other flooring.
Not Placing A Enough Order For Supplies
It is desirable to have laws that account for mistakes, miscalculations, and breakages, even though everyone prefers to be economical and avoid wasted supplies by purchasing more than they require.
The Incorrect Adhesive
Some decide to connect their architrave or Skirting Board using silicone or glue. Although this is acceptable and sometimes produces a neater finish, you must ensure that the silicone or adhesive is the proper kind—that is, that it will stick to the plaster well and have a firm enough grip. The improper kind of glue or silicone can occasionally remove paint off the wall, thus picking the wrong kind might lead to a number of issues.
Comments