You want to take off the outdated skirting, then. Perhaps you are getting rid of new ones because the design bothers you. Skirting Boards use to covering uneven surfaces or joints.
Prior to Beginning
Make sure you have these before you begin: Hammer, claw, pliers, crowbar, Stanley lade and instruments chisel.
Step 1: Look for any Blockages
Should this apply to your room; you must ensure that it is eliminated prior to attempting to remove the skirting boards.
The skirting boards you are taking out can be concealing cables if they were put more recently. There may be a rebate on more recent boards, which can be used to conceal wires. When trying to peel the skirting away from the wall, keep in mind that the wires may not be visible from the outside.
Step 2: Allowing the Skirting Boards to Loosen
It's time to get out the Stanley blade. The sharp edge needs to be run along the top of the skirting where it joins the wall. By completing this first, you can ensure that the paint will remain on the wall and not come off when the skirting is pulled. Additionally, it destroys the seal that decorators caulk made between the board and the wall. When decorating, this is nearly always utilized to provide a smooth finish and cover any little gaps that could otherwise look ugly. The hammer and chisel will then need to be used. Gently tap the chisel between the skirting and the wall with the hammer.
Step 3: The Third Step is to Pry the Skirtings off the Wall
You can now begin to remove the mop board from the wall since it is nicely loosened. It is probable that the present skirting was fastened to the wall by nails, screws, or glue, or a combination of these techniques. For this, you will need to use your chisel or crowbar. To prevent damaging the wall, place a block of wood between the crowbar and the skirting before placing it behind it. To get the tool of your choice between the top of the skirting, lightly tap with a hammer. Once all of the nails have been removed from the wall, the board ought to be effortlessly removed. Rinse now, then on to the next item.
Step 4-Getting Rid of Any Nails That Were Left Behind
After removing all of the Skirting Board, there is a chance that some nails may still be in the walls. Should that be the case, get your pliers ready so you can take them off. With your pliers, hold the nail you need to remove firmly. Use a light tugging motion. Claw hammers should be able to easily remove them if pliers are unable to release them. Once more, apply light pressure to prevent breaking the walls. Hammering them flush with the wall is our recommendation if the nail is difficult to remove. This will help keep the plaster from getting damaged and will also help you get the new skirtings fitted precisely.
Comments